I have prepared a small taste of our firmware/software solution. Check out the new gallery containing some screenshots that will give you a better idea of the basic concept of our UI. I’m also preparing an interactive mockup that will be much more detailed. In addition to the UI structure, it will also give you …
I’m really excited today because I can say that the printer is finally printing at the quality I dreamed of when I started this project. It took us (me and Pavel) a total of 3 years and 4 months (which sounds terrible). It means several thousand hours with huge swings of satisfaction when something is …
I’m glad to see that the large amount of time and effort that has gone into the accuracy of the scanning and printing itself has paid off. Here are some measurements that show surprisingly good results, deviating from the ideal dimensions by only hundredths of a millimeter. The printer thus meets the normal print service …
The software and hardware tuning of the printer seems to be entering its final stages. So it’s a good time to try printing some functional parts. In addition to changes in the slicing math, I also tested a new mechanical solution to remove repetitive z-axis artifacts caused by the ball screw. I’m really happy to …
This is the first test print of the year! Changes and improvements of our slicer have finally resulted in an improvement in the surface quality of the parts. But despite this, I am still not satisfied with the surface quality in the z-axis.It seems that both mechanical and another software changes need to be made. …
