ZERO1 Dimm Board

Availability: Available on backorder

Shipping Calculator

Smooth dimming of halogen/IR heaters!

ZERO1 dimming board allows you to detect ZERO crossings of the AC current sinwave. Just plug-in the Arduino Nano and you can smoothly regulate halogen/IR heaters intensity.

👉🏻 Building Inova 3D SLS Printer from scratch?

👉🏻 Need to regulate halogen/IR heaters in your own project?

👉🏻 Looking for the solution working with the random type SSRs?

👉🏻 Need smooth linear regulation of the halogen/IR heaters?

👉🏻 Do you like open source solutions?

ZERO1 dimming board is here to simply fulfill your creative needs! See below for more details.

439.00 Kč excl. VAT/Sales Tax

SKU: ZERO1-V1

Availability: Available on backorder


DELIVERY DATE

Back orders will be delivered within 4-6 weeks.

MAIN CHARACTERISTICS

Extension board that the Inova MK1 Printer uses to control (dim) halogen heater tubes. It has headers that fit Arduino Nano and screw connectors that should be wired to SSRs capable of random turn-on.

Note that typical SSRs are zero-cross, which means that the moment the SSR turns on/off is only when the switched AC voltage crosses 0V. Such SSRs are unusable for dimming and the mentioned random turn-on SSRs should be used instead.

Inova MK1 Printer expects that the Arduino Nano is flashed with our modified Klipper MCU Firmware that implements the dimming features  (freely available on our website).

FEATURES

  • AC mains screw connector to connect the board to 230V/110V mains voltage. Neccessary to synchronize the SSRs to mains frequency and phase.
  • Header for Arduino Nano (or clone)
  • Screw connectors to connect at most 5 random turn-on SSRs. The board drives the SSRs with 5V.
  • USB connection to the printer using USB connector on Arduino Nano

DIMENSIONS

  • Width: 33mm
  • Length: 72mm
  • Height: 21mm

This is not a pre-build functional product in any terms of meaning. It is the part or set of independent parts which may require e.g. assembly from professionals certified in working with electrical equipment.

This part/set of parts was manufactured on the basis of the documentation to the open source project published at SLS4All.com.

All the outputs of the SLS4All project are covered by License Agreement. Its key principles are as folows:

  • You can use, copy, modify and convey covered sources and products for non-commercial purposes only. You are not allowed to produce and sell Inova printers nor its parts.
  • We are not responsible for any damages, injuries, etc. caused in connection with the covered resources and products.
  • By exercising any right granted under the License, you irrevocably accept all its terms and conditions.

Reviews

There are no reviews yet.

Be the first to review “ZERO1 Dimm Board”

Related products

0
    0
    Your Cart
    Your cart is empty
    Continue Shopping